Carrier operating and maintanance Instrukcja Operatora Pobierz pdf (Strona 32)

Rev. __________

Date _________

2.14

15. Raise the vehicle into the final

towing position observing the far

end for sufficient ground clear-

ance. It is possible to set the

rear of a front lifted vehicle com-

pletely onto the ground, causing

damage. Take irregular road-

surfaces into consideration.

Observe the lift function from the

side and away from both ve-

hicles if possible. Make sure that

there are no under body com-

ponents of the towed vehicle in

contact with the “L” arms or

wheel grid device. Readjust if

necessary.

16. Power retract the grid boom un-

til the towed vehicle is about

three (3) to four (4) feet from the

back of the truck. Leave enough

room to maneuver around cor-

ners without corner binding or

causing contact between the two

(2) vehicles. Be sure that the

boom is extended at least 4

inches to insure unobstructed

crossbar pivoting.

17. Be sure to maintain sufficient

clearances with the bottom of

the towed vehicle.

18. Attach the safety chains and

magnetic towing lights. SAFETY

CHAINS MUST BE CROSSED.

CAUTION: Always tow with the tow bar extended so that adequate

clearance is maintained between deck and towed vehicle.

CAUTION: Properly secure the vehicle being towed. Use separate

safety chains from towed vehicle to carrier subframe.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 43 44

Brak uwag

Carrier operating and maintanance Instrukcja Operatora Strona 32