Carrier operating and maintanance Instrukcja Operatora Pobierz pdf (Strona 27)

Rev. __________

Date _________

2.9

7. Roll (lower deck)

Raise the roll handle (first lever) and move the lower deck in line with the

upper deck. This will let the load slide backwards on the deck. The upper

and lower deck surfaces should be in alignment. Be careful not to run the

lower deck into the upper deck. The two decks should barely touch.

8. Winch (upper deck)

Using the upper deck winch lever (sixth lever), winch the load up to the tire

stops of the upper deck. Keep the winch cable taut at this point.

9. Tilt (upper deck)

Tilt the upper deck down to its original position. After upper deck is in its

stowed position, secure the load to the upper deck. Never rely solely on

the winch to hold the load. At this point the lower deck can either be re-

turned to its stowed position or can be loaded as shown previously.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 43 44

Brak uwag

Carrier operating and maintanance Instrukcja Operatora Strona 27