Carrier operating and maintanance Instrukcja Operatora Pobierz pdf (Strona 25)

Rev. __________

Date _________

2.7

CAUTION: Always maintain a uniform wrap of cable on the drum.

“Nesting” of the winch cable may cause damager or pre-

mature wear of the winch cable.

CAUTION: Remember that cables break,winches fail,and hooks be-

come disengaged. DON’T WORK BELOW THE LOAD!

CAUTION: Replace worn or damaged cables. Always wear gloves

when handling cable. DO NOT USE CABLE CLAMPS!

D. LOADING THE OVERCAB DECK

1. POSITION

Position the truck with the rear of the deck approximately 12 feet from the

object to be loaded and in line with that object.

CAUTION: The unit should always be loaded and unloaded on level

and stable ground.

1a. Set the parking brake.

1b. With the engine running, engage the PTO per instructions in the

truck cab or in the PTO Operating Manual.

1c. Set the auxiliary throttle. After operating the unit several times,

one will establish a feel for the optimum speed. DO NOT

OVERSPEED.

2. Roll

Raise the rollback handle (first lever) and the deck will slide back. Roll the

deck rearward approximately 12 inches to clear the mechanical hold downs

at the front of the frame. A decal is provided on the rubrail to aid in deter-

mining the amount to roll. Align the decal pointer with the roll (first) control

handle.

12 FT.

SLIDE DECK UNTIL

ARROW ALIGNS WITH

FIRST LEVER

BEFORE TILITING

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 43 44

Brak uwag

Carrier operating and maintanance Instrukcja Operatora Strona 25