Carrier operating and maintanance Instrukcja Operatora Pobierz pdf (Strona 20)

Rev. __________

Date _________

2.2

1a. Set the parking brake.

1b. With the engine running, engage the PTO per instructions in the

truck cab or in the PTO Operating Manual.

1c. Set the auxiliary throttle. After operating the unit several times,

one will establish a feel for the optimum speed. DO NOT

OVERSPEED.

2. Roll

Raise the rollback handle and the deck will slide back. Roll the deck rear-

ward approximately 12 inches to clear the mechanical hold downs at the

front of the frame. A decal is provided on the rubrail to aid in determining

the amount to roll. Align the decal pointer with the roll (first) control handle.

3. Tilt

Raise the tilt control lever, raising the forward end of the deck until the rear

bumper rests firmly on the ground.

4. Roll

Raise the roll handle and the deck will slide back. Continue this operation

until the approach plate of the deck has contacted the ground. Make sure

that the rear bumper and the approach plate are both in firm contact with

the ground before loading. There should be an equal weight distribution

between the rear bumper and the end of the deck.

5. Winch

Winch the load onto the deck. Refer to the Winch Operation Manual for

specific winch operation procedures.

SLIDE DECK UNTIL

ARROW ALIGNS WITH

FIRST LEVER

BEFORE TILITING

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 43 44

Brak uwag

Carrier operating and maintanance Instrukcja Operatora Strona 20