Carrier operating and maintanance Instrukcje Operacyjne Pobierz pdf (Strona 5)

1 - SAFETY CONSIDERATIONS

1.1.

General

The 39HQ air handling units (AHUs) has been de-

signed and manufactured in accordance with the

CE machine directive EN292. In order to guarantee

safe operation and use of the unit, please carefully

read and observe the instructions in this document

and pay special attention to the warnings that apply

to this unit. Any modifications in the design and/or

installation of the AHU that are carried out without

discussion with Alarko Carrier and without advance

written agreement will result in the loss of the right

to any warranty claims and any claim for injury to

personnel as a result of these modifications.

Maintenance procedures may only be carried out by

qualified personnel.

Heating and cooling elements are manufactured and

supplied in accordance with guidelines of the Pres-

sure Equipment Directive (PED).

CE declaration of AHUs is given Annex-4.

1.2. Applications

The AHU is designed for the movement and con-

ditioning of air, unless otherwise agreed during the

design stage.

1.3. Instruction Types

The following warning pictograms and labels with

text are used.

Lifting Point

This label shows where the AHU can be lifted with

support beams. Support beams shall be used with

cranes. If forklifts are used for lifting, support beams

cannot be used.

Transporting From Side Base

It is forbidden to place lifting devices for transport and

storage under side profiles.

Earthing

This pictogram indicates where the AHU must be

earthed and is on one of the support beams beneath

the casing in the fan section.

- The electrical components in the AHU must be

earthed, except for components with double insula-

tion and/or components with a supply voltage below

50 V.

- The electrical components must be installed in ac-

cordance with national and local regulations.

Rotating Parts

This pictogram indicates that there are rotating parts

behind this access cover, door or panel which may

cause injury. The components that include rotating

parts are the fan and heat recovery wheel. If there

are special customer-specific components behind

doors, access covers or panels that include rotating

parts and pose a potential risk, this is also indicated

by this pictogram.

Hot Surfaces

This pictogram indicates that there are components

behind this access cover, door or panel that can

cause serious burns when touched.

The components that may have hot surfaces are

the steam humidifier, steam heater and the electric

heater. If there are special customer-specific com-

ponents behind doors, access covers or panels that

have hot surfaces and pose a potential risk, this is

also indicated by this pictogram.

1 - SAFETY CONSIDERATIONS

1.1 - General

The 39HQ air handling units (AHUs) has been designed

and manufactured in accordance with the CE machine

directive EN292. In order to guarantee safe operation and

use of the unit, please carefully read and observe the

instructions in this document and pay special attention to

the warnings that apply to this unit. Any modifications in

the design and/or installation of the AHU that are carried

out without discussion with Alarko Carrier and

without advance written agreement will result in the loss of

the right to any warranty claims and any claim for injury to

personnel as a result of these modifications.

Maintenance procedures may only be carried out by

qualified personnel.

Heating and cooling elements are manufactured and

supplied in accordance with guidelines of the Pressure

Equipment Directive (PED).

1.2 - Applications

The AHU is designed for the movement and conditioning

of air, unless otherwise agreed during the design stage.

1.3 - Instruction types

The following warning pictograms and labels with text are

used.

Lifting point

This pictogram shows where the AHU must be lifted and is

positioned on the support beam.

Lifting prohibited

This pictogram shows that no horizontal transport devices

must be placed under this frame section, such as pallet

lifters or the forks of fork lift trucks. It is also forbidden to

place lifting devices for transport and storage under this

frame element.

Earthing

This pictogram indicates where the AHU must be earthed

and is on one of the support beams beneath the casing in

the fan section.

- The electrical components in the AHU must be earthed,

except for components with double insulation and/or

components with a supply voltage below 50 V.

- The electrical components must be installed in accordance

with national and local regulations.

Rotating parts

This pictogram indicates that there are rotating parts behind

this access cover, door or panel which may cause injury. The

components that include rotating parts are the fan and heat

recovery wheel. If there are special customer-specific

components behind doors, access covers or panels that

include rotating parts and pose a potential risk, this is also

indicated by this pictogram.

Hot surfaces

This pictogram indicates that there are components behind

this access cover, door or panel that can cause serious burns

when touched.

The components that may have hot surfaces are the steam

humidifier, steam heater and the electric heater. If there are

special special customer-specific components behind doors,

access covers or panels that have hot surfaces and pose a

potential risk, this is also indicated by this pictogram.

1 - SAFETY CONSIDERATIONS

1.1 - General

The 39HQ air handling units (AHUs) has been designed

and manufactured in accordance with the CE machine

directive EN292. In order to guarantee safe operation and

use of the unit, please carefully read and observe the

instructions in this document and pay special attention to

the warnings that apply to this unit. Any modifications in

the design and/or installation of the AHU that are carried

out without discussion with Alarko Carrier and

without advance written agreement will result in the loss of

the right to any warranty claims and any claim for injury to

personnel as a result of these modifications.

Maintenance procedures may only be carried out by

qualified personnel.

Heating and cooling elements are manufactured and

supplied in accordance with guidelines of the Pressure

Equipment Directive (PED).

1.2 - Applications

The AHU is designed for the movement and conditioning

of air, unless otherwise agreed during the design stage.

1.3 - Instruction types

The following warning pictograms and labels with text are

used.

Lifting point

This pictogram shows where the AHU must be lifted and is

positioned on the support beam.

Lifting prohibited

This pictogram shows that no horizontal transport devices

must be placed under this frame section, such as pallet

lifters or the forks of fork lift trucks. It is also forbidden to

place lifting devices for transport and storage under this

frame element.

Earthing

This pictogram indicates where the AHU must be earthed

and is on one of the support beams beneath the casing in

the fan section.

- The electrical components in the AHU must be earthed,

except for components with double insulation and/or

components with a supply voltage below 50 V.

- The electrical components must be installed in accordance

with national and local regulations.

Rotating parts

This pictogram indicates that there are rotating parts behind

this access cover, door or panel which may cause injury. The

components that include rotating parts are the fan and heat

recovery wheel. If there are special customer-specific

components behind doors, access covers or panels that

include rotating parts and pose a potential risk, this is also

indicated by this pictogram.

Hot surfaces

This pictogram indicates that there are components behind

this access cover, door or panel that can cause serious burns

when touched.

The components that may have hot surfaces are the steam

humidifier, steam heater and the electric heater. If there are

special special customer-specific components behind doors,

access covers or panels that have hot surfaces and pose a

potential risk, this is also indicated by this pictogram.

1 - SAFETY CONSIDERATIONS

1.1 - General

The 39HQ air handling units (AHUs) has been designed

and manufactured in accordance with the CE machine

directive EN292. In order to guarantee safe operation and

use of the unit, please carefully read and observe the

instructions in this document and pay special attention to

the warnings that apply to this unit. Any modifications in

the design and/or installation of the AHU that are carried

out without discussion with Alarko Carrier and

without advance written agreement will result in the loss of

the right to any warranty claims and any claim for injury to

personnel as a result of these modifications.

Maintenance procedures may only be carried out by

qualified personnel.

Heating and cooling elements are manufactured and

supplied in accordance with guidelines of the Pressure

Equipment Directive (PED).

1.2 - Applications

The AHU is designed for the movement and conditioning

of air, unless otherwise agreed during the design stage.

1.3 - Instruction types

The following warning pictograms and labels with text are

used.

Lifting point

This pictogram shows where the AHU must be lifted and is

positioned on the support beam.

Lifting prohibited

This pictogram shows that no horizontal transport devices

must be placed under this frame section, such as pallet

lifters or the forks of fork lift trucks. It is also forbidden to

place lifting devices for transport and storage under this

frame element.

Earthing

This pictogram indicates where the AHU must be earthed

and is on one of the support beams beneath the casing in

the fan section.

- The electrical components in the AHU must be earthed,

except for components with double insulation and/or

components with a supply voltage below 50 V.

- The electrical components must be installed in accordance

with national and local regulations.

Rotating parts

This pictogram indicates that there are rotating parts behind

this access cover, door or panel which may cause injury. The

components that include rotating parts are the fan and heat

recovery wheel. If there are special customer-specific

components behind doors, access covers or panels that

include rotating parts and pose a potential risk, this is also

indicated by this pictogram.

Hot surfaces

This pictogram indicates that there are components behind

this access cover, door or panel that can cause serious burns

when touched.

The components that may have hot surfaces are the steam

humidifier, steam heater and the electric heater. If there are

special special customer-specific components behind doors,

access covers or panels that have hot surfaces and pose a

potential risk, this is also indicated by this pictogram.

1 2 3 4 5 6 7 8 9 10 ... 40 41

Komentarze do niniejszej Instrukcji

Brak uwag

Carrier operating and maintanance Instrukcje Operacyjne Strona 5

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Klimatyzatory typu split Carrier operating and maintanance