Carrier 40MBQB12C--3 Arkusz Specyfikacji Pobierz pdf (Strona 2)

INVERTER TECHNOLOGY

The inverter driven compressor is designed to run at various input

power frequencies (Hz) which controls the motor speed of the

compressor .

Even Temperature – The control package, including the inverter,

monitors outdoor and indoor temperatures as they relate to the

selected indoor set point and adjusts the speed of the compressor to

match the load and keep the system operating continuously rather

than cycling and creating temperature swings. This translates to

higher comfort levels for the occupants.

Rapid Pull Down/Warm- Up – Comfort is increased by the

ability to the inverter system to ramp up the compressor speed

enabling the system to reach the user selected room temperature set

point quicker.

Humidity Control – Running the system for longer periods and

continuously varying the compressor speed will enhance the

humidity control.

INDIVIDUAL ROOM COMFORT

Maximum comfort is provided because each space can be

controlled individually based on the usage pattern. The air sweep

feature provided permits optimal room mixing to eliminate hot and

cold spots for the occupant comfort.

LOW SOUND LEVELS

When noise is a concern, ductless split systems are the answer. The

indoor units are whisper quiet. There are no compressors indoors,

either in the conditioned space or directly over it, and there is none

of the noise usually generated by air being forced through

ductwork.

When sound ordinances and proximity to neighbors demand quiet

operation, the 38MG unit is the right choice. With the inverter

technology, these units run at lower speeds most of the time

resulting in reduced sound levels.

INVERTER TECHNOLOGY – ENHANCED

ECONOMICAL OPERATION

Ductless systems are inherently economical to operate. Individual

rooms are heated or cooled only when required, and since the air is

delivered directly to the space, there is no need to use additional

energy to move the air in the ductwork. This economical operation

is enhanced further when the inverter system output matches the

load resulting in a more ef ficient system.

EASY- TO- USE CONTROLS

The multi- zone systems have microprocessor-based controls to

provide the ultimate in comfort and efficiency. The user friendly

wired and wireless remote controls provide the interface between

the user and the unit.

SECURE OPERATION

If security is an issue, outdoor and indoor units are connected only

by refrigerant piping and wiring to prevent intruders from crawling

through ductwork or wall openings. In addition, since the 38MG

can be installed close to an outside wall, coils are protected from

vandals and severe weather.

FAST INSTALLATION

This compact ductless split system is simple to install. A mounting

bracket is included with the indoor units and only wires and piping

need to be run between the indoor and outdoor units. These units

are fast and easy to install ensuring minimal disruption to

customers in homes or workplace. This makes the 38MG / 40MA /

40MB systems the equipment of choice for retrofit applications.

SIMPLE SERVICING AND

MAINTENANCE

Removing the top panel of the outdoor unit provides immediate

access to the control compartment, providing the service technician

access to the diagnostic LEDs to facilitate the troubleshooting

process. In addition, the draw- thru design of the outdoor unit

means that dirt accumulates on the outside surface of the coil. Coils

can be cleaned quickly from the inside using a pressure hose and

detergent.

On the indoor units, service and maintenance expense is reduced

due to the permanent easy to clean filters. Also, error codes are

displayed on the front panel to alert the user to certain system

malfunctions

BUILT- IN RELIABILITY

Ductless split system indoor and outdoor units are designed to

provide years of trouble- free operation.

Both the indoor a nd outdoor units ar e well protect e d. Whe never the

mi croproces sor detect s a bnormal conditions, the unit will stop and an

error c ode is di spla yed.

Inverter systems provide additional reliability due to soft start. This

refers to the ability of the inverter to start the compressor motor

using reduced voltage and reduced current. This feature is

beneficial from an electrical standpoint (eliminates current spikes)

as well as an overall reliability standpoint due to reduced stress on

all associated system components.

CONDENSATE PUMP

A condensate pump accessory is available (High Wall and Floor

Console) to provide installation flexibility for those applications

where gravity cannot be used to dispose of the condensate.

Factory installed condensate pump on the Ducted and Cassette fan

coils provides installation flexibility.

AGENCY LISTINGS

All systems are listed with AHRI (Air conditioning, Heating, and

Refrigeration Institute) and are ETL certified per UL 1995

standard.

1 2 3 4 5 6 7 ... 35 36

Komentarze do niniejszej Instrukcji

Brak uwag

Carrier 40MBQB12C--3 Arkusz Specyfikacji Strona 2

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Klimatyzatory typu split Carrier 40MBQB12C--3