Carrier 19XL Dokumentacja Strona 17

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 80
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 16
Rig Machine Components
Refer to instructions below, Figure 5, Figure 6, Figure 7, Figure 8, Figure 9, and Carrier
Certified Prints for machine component disassembly.
Note:
If the cooler and condenser vessels must be separated, the heat exchanger separation
feet can be unbolted, slipped down, and re-bolted in order to keep each heat exchanger
level. See Figure 3.
IMPORTANT: Only a qualified service technician should perform this operation.
Do not attempt to disconnect flanges while the machine is under pressure. Failure
to relieve pressure can result in personal injury or damage to the unit.
WARNING
!
WARNING
CAUTION
CAUTION
!
Before rigging the compressor, disconnect all wires entering the power panel.
Przeglądanie stron 16
1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 79 80

Komentarze do niniejszej Instrukcji

Brak uwag