Carrier AC310 Dokumentacja

0 Xtension Lift Model: AC-310 AC-510 Installation Instructions 

92) Fix the top cover to two side covers. 3) Install the projector to the projector mounting bracket. Please follow the projector manufacturer’s

105) Please fix the back cover to two side covers. 6) Attach the cage to the ceiling mounted lift.

115. Connecting to Power Supply NOTE: All electrical wiring required for installation should be done by qualified electrical technician.

121) Please refer wiring diagram shown below. IR switch ( Top)

136. Setting the travel limit NOTE: Please set the DOWN limit before setting UP limit. 2) To set DOWN limit (show position), (i) Lower down th

143) To set UP limit (store position), (i) Bring the lift up to the store position or flush with the ceiling board. (ii) Loosen the screws of the

1XTENSION LIFT INSTALLATION INSTRUCTIONS Please read installation instructions carefully before installation and keep it for future reference.

2Installation and Operation Manual This manual explains how to install, operate and maintain the Xtension Lift for video projector. This manual is

34) Clear all persons and obstructions along the lift travel path while it is operating or in service. 5) Watch the moving projector lift and keep

4 Specification: Model AC 310 AC 510 Dimension (W x D) 210mmx150mm 210mmx150mm Height in Closed Position (w/o cage) 530mm 730mm Max. Weight Ca

5Dimensions

6Installation Instructions PLEASE ENGAGE LOCAL PROFESSIONAL INSTALLER TO PERFORM INSTALLATION. PLEASE ALWAYS FOLLOW LOCAL BUILDING CODES, ELECTRICA

74) Make sure that the lift is level in all directions and weight should be shared equally by all four threaded mounting rods. 5) Bottom of the li

84. Detachable Cage Assembly Exploded view of detachable cage 1) Fix left and right side cover to the ceiling cover frame. Top Cover Back c